Laser coatings
Very low absorption values
Maximum reflection
Own development department


The coatings for CO2 lasers are designed and manufactured for the highest demands in the industrial environment.
Total Reflector @ 10.6 µm
This coating is designed for High-Power applications and external optics for laser cutting or laser marking.
R > 99.9 % @ 10.6 µm and AOI 45° (s-pole)
R > 99.7 % @ 10.6 µm and AOI 45° (p-pole)
R > 45.0 % @ 0.632 µm and AOI 45° (r-pole)
Total Reflector @ 10.6 µm and 632 nm
This coating is designed for High-Power applications where an additional high reflection is needed for a pilot laser due to multiple reflections.
R > 99.8 % @ 10.6 µm and AOI 45° (s-pole)
R > 99.6 % @ 10.6 µm and AOI 45° (p-pole)
R > 75.0 % @ 0.632 µm and AOI 45° (r-pole)
Total Reflector Cavity at 10.6 µm
This coating is designed for High-Power CO2 laser cavities. It is particularly stable against the high UV radiation in the cavity and has low absorption.
R > 99.8 % @ 10.6 µm and AOI 0°
Enhanced Gold
This coating is based on a gold layer whose reflection is increased by dielectric multilayers.
R > 99.6 % @ 1.064 µm and AOI 45° (s-pole)
R > 99.4 % @ 1.064 µm and AOI 45° (p-pole)
All dielectric
This coating is designed for High-Power applications and consists of a dilelectric multilayer.
R > 99.9 % @ 1.064 µm and AOI 45° (s-pole)
R > 99.8 % @ 1.064 µm and AOI 45° (p-pole)




Enhanced Gold
This coating is based on a gold layer with an additional dielectric multilayer.
R > 99.6 % @ 1.064 µm and AOI 45° (s-pole)
R > 99.4 % @ 1.064 µm and AOI 45° (p-pole)
All dielectric
This coating is designed for High-Power fiber laser applications and consists of a dilelectric multilayer.
R > 99.9 % @ 930-980 nm and AOI 45° (s-pole)
R > 99.8 % @ 930-980 nm and AOI 45° (p-pole)
Do you need optics ready for immediate use?
Here you can find our overview of optical mirrors